search tips
powered by GYST 

Featured Product #10
Example Photos what's this?
Antique Red Oak Flooring - Blackfoot, Idaho (photoset #923)

8043  8040  8041  8042  8044 
Specification Sheet #6011 - Antique Oak T&G Flooring
SpeciesOak (White Oak and Red Oak mixed)
SourceBarns, corncribs, stables, mills, homes and other buildings and agricultural/industrial/construction structures and materials from different locations in North America
Flooring TypeSolid Wood, Unfinished
ProfileTongue and Groove (T&G)
KnotsUnlimited; some knots are broken, loose or fallen out
HolesRandom nail holes; occasional bolt holes or peg holes. Nail and bolt holes commonly have some stain surrounding the hole.
Checking/CracksModerate surface checking; some cracking is allowed as long as the board is sound.
Grain PatternMixed
Standard Dimensionsa) Thickness: 3/4"; b) Width: 2", 3", 4" and 5"; c) Length: 1' to 10'.
Textures AvailableSmooth, Skip-Planed, Circle-Sawn and As-Is
Skip-Planed TextureSkip-Planed Texture is achieved by using the texture of weathered timbers or lumber and lightly planing that as-is face. The look of the skip-planed material will vary substantially from piece to piece. Some of the characteristics that will vary substantially from piece to piece are: original weathering (brown/gray, deeply checked/relatively smooth); original texture (circlesawn/bandsawn/weathered smooth); species (red/white oak); and color (light tan/pinkish/brown/gray/etc.) Some pieces (roughly 70% of the square footage) will "clean up" entirely and have no skipping.

Because the finish face of Skip-Planed flooring is not entirely milled, there will often be a slight "lip" along the seams where two floor boards come together upon installation. Attention to slight differences from piece to piece may minimize the impact of these differences, but will not eliminate it as an issue entirely.
Appearance VariationBoards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted.

3-5" Antique Oak Smooth T&G Flooring

Antique Oak Smooth T&G Flooring
Specification Sheet #6011 - Antique Oak T&G Flooring

Request Quote

0.75" Rand 3-5" Rand 1-8'  sf
min: 250 sf

(your comments)

Add to Quote List 

Related Product Pages

Antique Oak Smooth T&G Flooring