search tips
powered by GYST 

Featured Product #250
Example Photos what's this?
Skip-Planed Coverboard Oak Floor (photoset #1654)
 

13576  13572  13573  13574  13575  13577  13578  13579  13580  13581  14635 
Specification Sheet #6027 - NatureAged Oak T&G Flooring
SpeciesOak (White Oak and Red Oak mixed)
SourceNatureAged Oak Lumber. NatureAged Lumber is lumber which is naturally weathered to achieve a rustic grayish/brown appearance. NatureAged Lumber may come from i) lumber reclaimed from various salvage projects, ii) lumber cut from beetle-killed, fire-killed or dead-standing trees, iii) lumber cut from material which has weathered out of spec, and/or iv) new lumber.
Flooring TypeSolid Wood, Unfinished
ProfileTongue and Groove (T&G)
KnotsUnlimited; some knots are broken, loose or fallen out
HolesNail holes every 3 to 4 feet.
Checking/CracksSurface checking is allowed; some cracking is allowed as long as board is sound.
Grain PatternPrimarily Flat Sawn
Standard Dimensionsa) Thickness (net): 3/4"; b) Width: Random, primarily 3" to 7"; most common widths are 4" and 5"; small amounts of wider boards (8 to 9" and 10"+) are sometimes available; and c) Length: 2 to 8' with no more than 10% of total footage shorter than 4'
Textures AvailableSmooth and Skip-planed.
Skip-Planed TextureSkip-Planed Texture is achieved by using the texture of weathered timbers or lumber and lightly planing that as-is face. The look of the skip-planed material will vary substantially from piece to piece. Some of the characteristics that will vary substantially from piece to piece are: original weathering (brown/gray, deeply checked/relatively smooth); original texture (circlesawn/bandsawn/weathered smooth); species (red/white oak); and color (light tan/pinkish/brown/gray/etc.) Some pieces (roughly 50% of the square footage) may "clean up" entirely and have no skipping.

Because the finish face of Skip-Planed flooring is not entirely milled, there will often be a slight "lip" along the seams where two floor boards come together upon installation. Attention to slight differences from piece to piece may minimize the impact of these differences, but will not eliminate it as an issue entirely.
Appearance VariationBoards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted.

Specific Width NatureAged Oak Skip-Planed T&G Flooring


NatureAged Oak Skipped T&G Flooring
Specification Sheet #6027 - NatureAged Oak T&G Flooring

Request Quote


HeightWidthLengthQuantity
0.75"
2-9"
Rand 2-8'  sf
min: 250 sf

(your comments)

Add to Quote List 

Related Product Pages