Weathered Oak Lumber

Oak Rustic Weathered for Table Tops

KD (1 charge); Weathered 1 face; not Edged

Specification Sheet #6228 - Antique Weathered Oak Lumber

Height

Width

Length

Quantity

2" (nominal)

6" (nominal)

3'10" - 4'

min: 4 each

List Price: $40.00 per each
Online Price:$36.00 per each

Request Quote Instead
(large quantities, any customization, etc.)

Height

Width

Length

Quantity

2" (nominal)

6" (nominal)

3'10" - 4'

min: 4 each

Related Productline Pages

Table Top / Countertop Lumber

Specification Sheet #6228 - Antique Weathered Oak Lumber

Species

Oak (White Oak and Red Oak mixed)

Source

Barns, corncribs, stables, mills, homes and other buildings and agricultural/industrial/construction structures and materials from different locations in North America

Holes

Nails and other fasteners are left in the material or may be removed, leaving occasional nail holes. Staining around nail and fastener holes is common.

Knots

Unlimited; some knots are broken, loose or fallen out

Checking/Cracks

Surface checking is allowed; some cracking is allowed as long as board is sound.

Grain Pattern

Mixed

Moisture Content/Stability

Antique Weathered Oak Lumber is air dried over years of having been in an old structure. The resulting lumber is much more stable and less prone to shrinkage than is green lumber.

Standard Dimensions

a) Thickness: approximately 1" or approximately 2"; b) Standard Width: Random, 3" to 6"; most common widths are 5" and 6"; wider boards (7 to 10"+) are available (please request quote); and c) Length: 1' increments up to 16', with most common lengths being in the 8-13' range.

Weight

Typically, approximately 4 pounds per board foot

Surfacing

Antique Weathered Oak Lumber will have at least one weathered face.

Color/Appearance

Some boards are more rustic than others; in general, boards have a nice aged appearance, with checking, knots, nail holes, stain, some water-stain, etc. (all in varying degrees).

Appearance Variation

Boards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted. Weathered lumber / barnwood will have at least one weathered face. The opposite face and edges can be any combination of weathered and fresh-sawn. If weathered, the weathering will often be different (amount, mix of colors, etc) than on the featured face.