search tips
 | 
video
powered by GYST 


Back to Search Results
TIMBER CALCULATORS
Board Feet Calculator
Willamette Dry Dock 10x12
/image/780/17083/
/image/780/14477/
/image/780/14478/
/image/780/14479/
/image/780/14481/
/image/780/14482/
/image/780/14501/
More photos

Willamette Dry Dock 10x12

 
 
 

Shop Standard Configurations

(great value and good lead times!)
DescriptionHeightWidthLengthPriceQuantity Discounts
10x12 Willamette Dry Dock DF Timbers10"12"
to 35'
 

Request Custom Quote

(additional costs and lead times generally apply)

Don't see what you need? Fill out our more generic Request for Quote form.


 

Willamette Dry Dock 10x12 - Product Info


Salvaged from pontoons of Drydock #2 at the Portland, Oregon, Shipyard, our Willamette Character Douglas Fir Timbers are a truly unique timber options from an equally unique source. These 10x12s are very worn and weathered; the material looks almost "sandblasted" or like driftwood. Depending on the amount of wear, actual heights may vary from 8.5" up to 9.5" and actual widths may be from 10.5" up to 11.5". One end is more worn than the other.

Specification Sheet #2118 - Willamette Character Weathered Timbers
SpeciesPrimarily Douglas Fir
SourcePortland (Oregon) Shipyard Floating Drydock #2 (Pontoons)
HC/FOHCMixed FOHC and HC; usually tight to very tight growth rings.
MetalNails, bolts and other fasteners are removed or occasionally cut flush or broken off inside the material.
HolesBolt and other fastener holes are common; the quantity and size of the holes can vary widely from timber to timber, with some timbers containing few holes and others containing extensive bolt holes. Staining around holes is extensive. Notches are present on many timbers--the exact size and frequency depends on the size of timber needed.
Checking/CracksSurface checking and cracking is common in Willamette Rustic Timbers. As many of these timbers are FOHC, heart checking is less prevalent than in standard Resawn Douglas Fir timbers.
Moisture Content/StabilityWillamette Rustic Timbers are saturated with water as a result of their use as pontoon timbers. Most timbers have significant air-dry time. When cut, the resulting timbers are much more stable and less prone to shrinkage than are green timbers.
SurfacingWeathered; Surface degradation (water damage or surface rot or "punkiness") is common.
Standard DimensionsPlease call your Trestlewood representative for an accurate list of sizes available.
WeightTypically, approximately 3.5 pounds per board foot
GradingWillamette Character Weathered timbers can be graded (WLCB) upon request. Timbers are graded with exception taken for any holes. It is highly recommended that any timbers that are to be used in a structural application be graded.
Appearance VariationWeathered timbers will generally vary in appearance from piece to piece and even within a piece. The weathering (amount, mix of colors, etc) and other characteristics of one face can be substantially different than the weathering and other characteristics of another face. Some weathered timbers are cut from larger weathered timbers, giving them one or more fresh-sawn faces. Such fresh-sawn faces can often be made to look less bright (and more weathered/aged) to help them blend in with weathered faces.

Note: Please study specification sheets to familiarize yourself with product characteristics and their possible implications for your application.