Shop Standard Configurations(great value and good lead times!)
|Picklewood Weathered Timbers|
Request Custom Quote(additional costs and lead times generally apply)
Don't see what you need? Fill out our more generic Request for Quote form.
Picklewood Weathered - Product Info
Weathered Picklewood Timbers are a great source of mixed species weathered timbers with unique brown weathered tones. They are generally shorter, since they were used to support pickling vats and they usually do not have a lot of metal or holes where metal was removed.
|Source||Weathered Picklewood Timbers were used as cribbing to support pickle vats. The timbers are salvaged from pickle processing plants which are no longer in use.|
|HC/FOHC||Weathered Picklewood timbers are almost exclusively heart center timbers; usually moderate to very tight growth rings.|
|Metal||Nails, bolts and other fasteners are removed or occasionally cut flush or broken off inside the beam. Staining around nail and bolt holes is common.|
|Checking/Cracks||Weathered Picklewood timbers generally have a check from the heart center to one of the faces of the timber. In addition, timbers can have surface checking and cracks, moderate butt checking and minor end splitting.|
|Moisture Content/Stability||Weathered Picklewood Timbers have significant moisture content (though often with significant air drying)|
|Surfacing||Weathered Picklewood timbers are generally very weathered (degree of weathering varies); original timber surface was generally rough-sawn, but may have been worn rather smooth; Surface degradation (water damage or surface rot or "punkiness") is common; weathered timber colors vary -- common colors include dark browns, grays and combinations of browns and grays.|
|Standard Dimensions||a) Cross-sections: to 10x10; b) Lengths: to 16';|
c) Timbers Nominal: most timbers dimensions are nominal.
d) Size Flexibility: The more latitude the customer can provide in acceptable timber sizes, the better able Trestlewood is to meet the customer's timber needs in an economical and timely manner.
|Weight||Depending on species mix. Typically, approximately 4 pounds per board foot|
|Grading||Weathered Picklewood timbers can be graded (WLCB) upon request. Timbers are graded with exception taken for any mortise pockets and holes. It is highly recommended that any timbers that are to be used in a structural application be graded. It is also recommended that standard size timbers be used whenever possible.|
|Salt/Minerals||Weathered Picklewood timbers are the timbers upon which pickle vats rested and as a result, contain significant amounts of salt and other minerals, creating special characteristics and/or considerations like those described in the following items.|
|Color/Appearance||The coloring of individual Weathered Picklewood timbers |
varies widely. Such color variations are not as pronounced in the weathered form, but sawn Picklewood timbers have color variation which ranges from normal Douglas Fir coloring to color combinations unique to Picklewood timbers. Color variations are more noticeable in band-sawn and planed timbers than in weathered timbers.
|Finishes/Glues||Certain finishes and glues do not work well with Weathered Picklewood timbers. Most importantly, DO NOT USE WATER-BASED FINISHES.|
|Metal Corrosiveness||Picklewood timbers can have a corrosive effect on metal fasteners, machinery and saw blades. Stainless steel fasteners should be used in lieu of regular steel fasteners, especially in applications involving the likely mixing of Picklewood, moisture and oxygen.|
|Moisture||Picklewood absorbs moisture more readily than typical Douglas Fir. Picklewood timbers (especially timbers with air dry time) should be handled, stored and transported carefully to minimize any unnecessary reabsorption of moisture.|
|Odor||Picklewood timbers often have a strong pickling smell to them. This odor is especially strong as wet timbers are being cut or otherwise processed. It tends to become less and less of an issue as timbers are allowed to air dry.|
|Salt Leaching||As moisture is drawn out of Picklewood timbers, it brings salt with it. Salt leaching tends to be the most concentrated at knots and timber ends, but can happen anywhere. Air dry time reduces, but does not eliminate, salt leaching. Approaches to salt leaching include sanding and refinishing impacted areas to doing nothing (and letting the salt serve as one of the most visible evidences of the history and reclaimed nature of Picklewood timbers.) Salt is more visible on processed timbers than on weathered timbers.|
|Appearance Variation||Weathered timbers will generally vary in appearance from piece to piece and even within a piece. The weathering (amount, mix of colors, etc) and other characteristics of one face can be substantially different than the weathering and other characteristics of another face. Some weathered timbers are cut from larger weathered timbers, giving them one or more fresh-sawn faces. Such fresh-sawn faces can often be made to look less bright (and more weathered/aged) to help them blend in with weathered faces.|
Note: Please study specification sheets to familiarize yourself with product characteristics and their possible implications for your application.