search tips
powered by GYST 

Featured Product #258
Example Photos what's this?
Reclaimed Douglas Fir Timbers, Lumber and Flooring - Blackfoot, Idaho (photoset #243)

1651  1652  1653  1654  1655  14585 
Specification Sheet #2002 - Douglas Fir Classic T&G Flooring
SpeciesDouglas Fir
SourceVarious reclaimed wood projects
Flooring TypeSolid Wood, Unfinished
ProfileTongue and Groove (T&G)
Knots1 tight knot (1" or under) every 1 square foot allowed (on a 1x6 board, this would translate into 1 tight knot every 2 linear feet); larger knots in lower frequency allowed (for example, a 2" knot in 2 square feet that is otherwise clear would be allowed); 2" maximum knot size; knots can be broken, loose or fallen out
HolesOccasional random nail holes and bolt holes; some staining around the nail holes and bolt holes or on the face is allowable
Checking/CracksModerate amounts of surface checking allowed; no cracks
Grain PatternModerately tight grain; vertical, flat or mixed
Standard Dimensionsa) Thickness: 3/4"; b) Width: Varies, depending on Douglas Fir Classic Millwork Stock available at time of order; typical Classic flooring widths can be expected to be 3" to 7"; wider (and/or narrower) Classic flooring may be available at any given time; and c) Length: 1 to 10'.
Textures AvailableSmooth, Wire-Brush and Circle-Sawn
Appearance VariationBoards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted.

Specific Width Douglas Fir Classic Smooth T&G Flooring

DF Classic T&G Flooring
Specification Sheet #2002 - Douglas Fir Classic T&G Flooring

Request Quote

0.75"  "
Rand 2-10'  sf
min: 250 sf

(your comments)

Add to Quote List