search tips
 | 
video
powered by GYST 

Featured Product #475
Example Photos what's this?
Redwood Picklewood - Thin Band-Sawn (photoset #27581)
 

107180  107181 
Specification Sheet #4215 - Weathered Redwood Picklewood Staves and Bottoms
SpeciesRedwood
SourcePickle Vats salvaged from different sites in North America
HolesOccasional small nail holes; no visible bolt holes (staves were sometimes and bottoms were always assembled with wood dowels so there are some dowel holes on the edge)
Knots90% clear. Some boards will have pin knots.
Checking/CracksUnlimited as long as board is sound; end cracks to extend no more than 6" into board; some boards have dark checking, making them ideal for a distressed millwork product
Grain PatternTight grain; Mixed
Moisture Content/StabilityAir-Dried. Material is seasoned and tends to be stable.
Standard Dimensionsa) Thickness: 6/4"-8/4"; b) Width (nominal): 4"-7"; actual widths typically range from 3/4" under listed width to full listed width (6" boards would typically measure from 5 1/4" to 6", for example); and c) Length: 1' increments up to 8'. Thicker, wider and longer material is often available--ask your Trestlewood representative for details and pricing.
WeightTypically, approximately 3 pounds per board foot
SurfacingWeathered As-is or Planed (S4S) (planed to nominal dimensions)
Salt/MineralsPicklewood materials contain significant amounts of salt and other minerals, creating special characteristics and/or considerations like those described in the following items.
Color/AppearanceThe coloring of individual Picklewood boards varies widely. Such color variations are not as pronounced in the as-is form, but processed Picklewood materials have color variations which range from normal Redwood coloring to color combinations unique to Picklewood materials.
Finishes/GluesCertain finishes and glues do not work well with Picklewood materials. Most importantly, DO NOT USE WATER-BASED FINISHES.
Metal CorrosivenessPicklewood materials can have a corrosive effect on metal fasteners, machinery and saw blades. Stainless steel fasteners should be used in lieu of regular steel fasteners, especially in applications involving the likely mixing of Picklewood, moisture and oxygen.
MoisturePicklewood absorbs moisture more readily than typical Redwood. Picklewood material (especially material with air dry or kiln dry time) should be handled, stored and transported carefully to minimize any unnecessary reabsorption of moisture.
OdorPicklewood materials often have a strong pickling smell to them. This odor is especially strong as wet material is
being cut or otherwise processed. It tends to become less and less of an issue as material is allowed to air dry (or as material is kiln dried).
Salt LeachingAs moisture is drawn out of Picklewood materials, it brings salt with it. Salt leaching tends to be the most concentrated at knots and material ends, but can happen anywhere. Air dry time (and kiln drying) reduces, but does not eliminate, salt leaching. Approaches to salt leaching include sanding and refinishing impacted areas to doing nothing (and letting the salt serve as one of the most visible evidences of the history and reclaimed nature of Picklewood materials.) Salt is more visible on processed materials than on as-is materials.
Appearance VariationBoards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted. Weathered lumber / barnwood will have at least one weathered face. The opposite face and edges can be any combination of weathered and fresh-sawn. If weathered, the weathering will often be different (amount, mix of colors, etc) than on the featured face.

Redwood Picklewood Thin Middles

band-sawn faces

3/8"+/- Redwood Picklewood Thin Middles
Specification Sheet #4215 - Weathered Redwood Picklewood Staves and Bottoms

HeightWidthLengthQuantity
Rand 1/4-1/2" Rand 3-7" Rand to 10'  sf
min: 250 sf
List Price: $4.00 per sf
Online Price: $3.60 per sf

Add to Shopping Cart 

Request Quote Instead

(large quantities, any customization, etc.)
HeightWidthLengthQuantity
Rand 1/4-1/2" Rand 3-7" Rand to 10'  sf
min: 250 sf

(your comments)

Add to Quote List 

Related Product Pages


Picklewood Redwood - Millwork Stock