Shop Standard Configurations(great value and good lead times!)
|Trailblazer Weathered Timbers|
Request Custom Quote(additional costs and lead times generally apply)
Don't see what you need? Fill out our more generic Request for Quote form.
Trailblazer Weathered - Product Info
Trestlewood's Trailblazer Weathered Timbers are the perfect answer for a project that needs the beauty of rustic timbers.
Weathered Timbers are mixed species and will have a range of colors and characteristics (including pockets and notches fom original joinery) that you would expect from timbers reclaimed from vintage barns and other agricutural structures. Trailblazer Weathered Timbers can be sorted for broadly defined characteristics (browns vs. grays or hardwoods vs. softwoods), but absolute consistency is neither desirable nor achievable with this product.
|Introduction||When the first settlers moved into new regions of our expanding nation, they cleared small plots of ground for subsistence farming and used the felled trees for logs and timbers to construct homes for themselves and barns for their livestock. Because these resourceful settlers had to use what was available to them, they often did not discriminate among wood species--if the trees they felled were solid and durable they were used in the needed structures. It is in that same spirit of resourcefulness, economy and good stewardship that Trestlewood offers the Trailblazer Rustic Timber Mix in hardwood, softwood and weathered. Rest assured that the timbers you purchase will be the same mix of hearty North American species as was used by our great, great grandfathers more than a century ago.|
|Species||Mixed Species. May include Oak, Elm, Hickory, Ash, Maple, Beech, Poplar, Pine, Fir, Spruce, Cedar, Larch, Douglas Fir, others.|
|Source||Barns, corncribs, stables, mills, homes and other buildings and agricultural/industrial structures from different locations in North America|
|HC/FOHC||Trailblazer Rustic timbers are almost exclusively heart center timbers; usually moderate to very tight growth rings.|
|Metal||Nails, bolts and other fasteners are removed or occasionally cut flush or broken off inside the beam. Staining around nail and bolt holes is common.|
|Mortise Pockets/Notches/Holes||Mortise pockets and notches from the original joinery are common. Nail, bolt, peg and other fastener holes are allowed. The quantity and size of mortise pockets and holes can vary widely from timber to timber, with some timbers containing very few and others containing frequent mortise pockets, notches, peg holes and nail holes.|
|Checking/Cracks||Trailblazer Rustic timbers generally have a check from the heart center to one of the faces of the timber. In addition, timbers can have surface checking and cracks, moderate butt checking and minor end splitting.|
|Moisture Content/Stability||Trailblazer Rustic timbers are generally very dry and seasoned, and are much more stable and less prone to shrinkage than are green timbers.|
|Surfacing||Weathered (degree of weathering varies); original timber surface was rough-sawn, but may have been worn rather smooth; surface degradation (waterdamage or surface rot or "punkiness") is common; weathered timber colors vary -- common colors include browns (common for interior weathered timbers), grays (common for exterior weathered timbers) and combinations of browns and grays.|
|Standard Dimensions||a) Cross-sections: to 10x10; b) Lengths: to 16';|
c) Timbers Nominal: most timbers dimensions are nominal.
d) Size Flexibility: The more latitude the customer can provide in acceptable timber sizes, the better able Trestlewood is to meet the customer's timber needs in an economical and timely manner.
|Available Dimensions||a) Cross-sections: depending on inventory in stock (sizes available in the past include 10x14, 8x14, others); |
b) Lengths: depending on inventory in stock. Please contact your Trestlewood representative for available sizes.
|Weight||Depending on species mix. Typically, approximately 3.5 pounds per board foot|
|Grading||Trailblazer Rustic timbers can be graded (WLCB) upon request. Timbers are graded with exception taken for any mortise pockets and holes. It is highly recommended that any timbers that are to be used in a structural application be graded. It is also recommended that standard size timbers be used whenever possible. Checking and holes (where metal has been removed) tend to be more pronounced in timbers wider and/or thicker than 12" than in standard size timbers.|
|Appearance Variation||Weathered timbers will generally vary in appearance from piece to piece and even within a piece. The weathering (amount, mix of colors, etc) and other characteristics of one face can be substantially different than the weathering and other characteristics of another face. Some weathered timbers are cut from larger weathered timbers, giving them one or more fresh-sawn faces. Such fresh-sawn faces can often be made to look less bright (and more weathered/aged) to help them blend in with weathered faces.|
Note: Please study specification sheets to familiarize yourself with product characteristics and their possible implications for your application.