min: 1 each
Don't see what you need? Fill out more generic Request For Quote Form
The salt and other minerals of the Great Salt Lake have helped create our signature Trestlewood II product line, known for its wide range of colors and other unique characteristics. Trestlewood II Weathered Lumber is sawn from Douglas Fir piling of the Great Salt Lake's Lucin Cutoff railroad trestle then weathered in the natural environment of the Great Salt Lake.
Looking for a "budget" option in Weathered Trestlewood II? Consider our Trestlewood II Weathered Resawn Slabs.
|Source||Piling of Lucin Cutoff Railroad Trestle--Great Salt Lake|
|Holes||Some boards have occasional 1" diameter holes where metal has been removed. Such holes are generally surrounded by streaking black stains.|
|Knots||Unlimited; occasional loose or fallen out knots|
|Checking/Cracks||Unlimited as long as board is sound|
|Moisture Content/Stability||Water saturated (often with significant air drying)|
|Standard Dimensions||a) Thickness: 1" and 2"; b) Width: 4", 6", 8" and 10"; and c) Length: 2' increments, up to 12'|
|Available Dimensions||a) Thickness: to 2.5"; b) Width: to 16"; c) Length: to 24' (longer lengths may be possible on a case-by-case basis); d) Target Dimensions: circle-sawn lumber is targeted at full-sawn dimensions for dimensions to 12" and 1/2" nominal dimensions for dimensions greater than 12"; e) Tolerances: circle-sawn lumber is cut to the stated dimensions +/- 1/4"; tolerances can be somewhat greater for lumber wider than 12" and/or longer than 16'; weathered Trestlewood II lumber can also have somewhat greater tolerances.|
|Weight||Typically, approximately 4 pounds per board foot|
|Surfacing||Circle-Sawn or Circle-Sawn Weathered|
|Salt/Minerals||Trestlewood contains significant amounts of salt and other minerals (often 20%+ by weight), creating special characteristics and/or considerations like those described in the following items.|
|Color/Appearance||Colors found in Trestlewood II include yellows, oranges, reds, browns, greens, grays/blacks and purples. The coloring of individual boards varies widely, from normal Douglas Fir coloring to color combinations unique to Trestlewood II. Surfacing and finishes impact final coloring. Color variations are more noticeable in planed and milled products than in circle-sawn or band-sawn products.|
|Finishes/Glues||Certain finishes and glues do not work well with Trestlewood II. Most importantly, DO NOT USE WATER-BASED FINISHES. We tend to favor penetrating oil finishes on non-kiln-dried Trestlewood II lumber and other non-kiln-dried Trestlewood II products because they allow the wood to breathe, thereby facilitating efficient air drying.|
|Fire Retardance||Schuller International performed an ASTM E-84 Flame Spread test on a Trestlewood II piling sample in January, 1995. The resulting index value was 16, well below the maximum index value of 25 for a Class I fire retardant. Normal Douglas Fir has a flame spread index of 70 to 100. Only a few wood species have flame spread index values less than 75. Fire retardant treatments are generally necessary to meet Class I (and often to meet Class II.)|
|Metal Corrosiveness||Trestlewood II can have a corrosive effect on metal fasteners, machinery and saw blades. High grade stainless steel fasteners should be used in lieu of regular steel fasteners, especially in applications involving the likely mixing of Trestlewood II, moisture and oxygen.|
|Moisture||Trestlewood II circle-sawn boards are not a kiln-dried product--they should not be used in applications requiring kiln-dried wood. Air drying Trestlewood II boards can reduce their moisture content over time, but this tends to be a slow process given that Trestlewood II gives up moisture more grudgingly (and absorbs moisture more readily) than typical Douglas Fir. The salt in Trestlewood II makes moisture meter readings unreliable. Trestlewood II products should only be used in humid environments after you have carefully considered Trestlewood II characteristics and the implications of those characteristics for your application.|
|Odor||Wet Trestlewood II boards often have a Great Salt Lake and/or "musty" smell to them. This odor is especially strong as wet boards are being cut or otherwise processed. It tends to become less and less of an issue as boards are allowed to air dry and are kept dry. Our experience suggests that a Trestlewood II odor is most likely to be noticeable in situations involving moisture or high humidity; limited ventilation / air circulation; and/or uncoated/unsealed Trestlewood II products. We believe the most important step in minimizing Trestlewood II odor issues is to control moisture by facilitating the efficient air drying of non-kiln-dried Trestlewood II products and minimizing any reintroduction of moisture.|
|Salt Leaching||As moisture is drawn out of Trestlewood II boards, it brings salt with it. Salt leaching tends to be the most concentrated at knots and board ends, but can happen anywhere. Drying Trestlewood II boards (and keeping them dry) minimizes, but does not eliminate, salt leaching. Approaches to salt leaching include sanding and refinishing impacted areas to doing nothing (and letting the salt serve as one of the most visible evidences of the history and reclaimed nature of Trestlewood II timbers.) Salt is more visible on planed and milled products than on circle-sawn or band-sawn products.|
|Appearance Variation||Boards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted. Weathered lumber / barnwood will have at least one weathered face. The opposite face and edges can be any combination of weathered and fresh-sawn. If weathered, the weathering will often be different (amount, mix of colors, etc) than on the featured face.|
Trestlewood sometimes uses one or more juicing processes to help fresh-sawn and/or less weathered/aged faces/edges blend in with weathered faces/edges. All else being equal, juicing is more likely to be used in situations where (a) lumber is cut from timbers or wider lumber (thereby creating fresh-cut faces and/or edges); (b) Buyer wants all (or most) faces/edges to be weathered/aged; (c) Buyer desires to increase the consistency of the weathered/aged look from face to face; and/or (d) Buyer wants a darker weathered look.
|Additional Information||See the current Trestlewood II Features/Issues summary for additional information about Trestlewood II characteristics and their practical implications. This summary is for informational purposes only and is not a part of the Trestlewood II Circle-Sawn Boards specification sheet.|