Shop Standard Configurations(great value and good lead times!)
|Antique Weathered Redwood Thins (30 sf box)|
each box contains 72 linear feet of product
$270.00 per box
Request Custom Quote(additional costs and lead times generally apply)
Don't see what you need? Fill out our more generic Request for Quote form.
Antique Weathered Redwood Thins - Product Info
Barnwood Thins are Trestlewood's most consistent, ready-to-install interior barnwood product. Ideal for accent walls, small DIY projects, crafts, and other interior uses. Antique Weathered Redwood Thins provide a mix of gray and brown color tones in reclaimed weathered Redwood.
Mixed Hardwood Bright Thins (fresh-sawn hardwood thins in same dimensions) also provide a nice complementary product that can contribute to a cool mix of colors. Check out how finishing this product with Danish Oil can really make it pop.
No two boxes of Thins will be exactly the same.
|Products Involved||Trestlewood's BrownBlend, GrayBlend and Other Thins products (hereafter referred to as "Thins") involve a mix/blend of various sources of reclaimed/antique materials and materials naturally aged/processed to give them a weathered/aged appearance. Trestlewood products that can be used to produce Thins include, but are not necessarily limited to, any combination of NatureAged Lumber (Specification Sheet #7220), Antique Barnwood Lumber (Spec Sheet #7200), Harbor Fir Lumber (Spec Sheet #2240), ThermalBrown Lumber (Spec Sheet #7230), RubyHardwood Lumber (Spec Sheet #6147), 3/8"+/- Weathered Pine Jackets (Spec Sheet #3242), 3/8"+/- Weathered Picklewood/Other Jackets (Spec Sheet #2241), and various other products/sources.|
|Species||Mixed, generally heavy to (and often exclusively) softwoods. Hardwoods can be included in the mix at Trestlewood's discretion. Hardwood Thins are sometimes available (generally at higher cost).|
|Source||NatureAged: Material that has been naturally weathered/aged/processed to achieve a rustic grayish/brown appearance. Lumber used in Trestlewood's NatureAged Lumber program can be i) new lumber, ii) lumber cut from beetle-killed, fire-killed or dead-standing trees, iii) lumber cut from material which has weathered out of spec, and/or iv) lumber cut from lumber/timber reclaimed from various salvage projects/prior uses (this lumber also qualifies as Antique Barnwood Lumber.)|
Reclaimed/Antique: Reclaimed sources include barns, corncribs, stables, trestles, mills, homes and other buildings/agricultural structures and construction projects from different locations in North America. Picklewood comes from pickle vats salvaged from different sites in North America. Trestlewood II comes from Douglas Fir piling salvaged from the Lucin Cutoff railroad trestle in the Great Salt Lake.
Other: Harbor Fir Lumber, ThermalBrown Lumber, RubyHardwood Lumber, etc (see individual spec sheets.)
|Knots||Unlimited; occasional loose or fallen out knots|
|Checking/Cracks||Checking/cracks are allowed as long as they do not result in the board falling apart with minimal pressure.|
|Moisture Content/Stability||Kiln-Dried. Thin lumber products can generally be expected to have some stability issues (cupping, twisting, etc.) Kiln drying (and relatively narrow width and short lengths) should help mitigate (but not eliminate) such issues.|
|Standard Dimensions||a) Thickness: approximately 5/16" (+/- 1/16"); b) Width: 5"; and c) Length: 1', 2', 3' and 4', heavy to 4' (generally 1/2 to 2/3 of square footage will be in 4' lengths)|
|Weight||Typically, approximately 0.60-1.00 pounds per square foot.|
|Surfacing||Thins include a wide range of surfacing/textures. NatureAged Lumber is generally originally rough-sawn (circle-sawn or band-sawn), but may have weathered rather smooth. Antique Barnwood and other sources can be rough-sawn or smooth. Degree of weathering varies from source to source. Antique Barnwood is often more deeply weathered than NatureAged Lumber.|
Available in 4 color/source sorts: BrownBlend Thins (heavy to brown tones), GrayBlend Thins (heavy to gray tones), BrownGrayBlend Thins (mix of browns and grays), and Antique Weathered Redwood (mix of browns and grays.) For a stunning customized color scheme, use your preferred mix of these 4 color/source sorts and Mixed Hardwood Bright Thins (fresh-sawn, no weathered face.)
Weathered Thins will almost always have a fresh-sawn or planed (or less heavily weathered) back face and 2 fresh-sawn edges (i.e., the focus is on producing a product with 1 weathered "primary" face).
|Salt/Minerals||Picklewood materials contain salt and other minerals, creating special characteristics and/or considerations such as color/appearance, finishes/glues, metal corrosiveness, moisture, etc. (see Picklewood Specification Sheet #2241 for more information).|
|Appearance Variation||Boards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted. Weathered lumber / barnwood will have at least one weathered face. The opposite face and edges can be any combination of weathered and fresh-sawn. If weathered, the weathering will often be different (amount, mix of colors, etc) than on the featured face.|
|Other||Thins can be very brittle and may split easily. Special care is advisable.|
Trestlewood is not a construction or design company and does not get involved in the installation/use of its products. We do not offer installation instructions. Given that Thins are more likely than most Trestlewood products to be used by non-professional homeowners, we have compiled a list of "Installation Thoughts to Consider" when using these products. These thoughts represent a starting point only and are not represented to be accurate for your particular location and/or application. If you have any questions, please consult a construction professional.
Thins are not recommended for exterior use.