Specific Width Trailblazer Mixed Hardwood Skip-Planed T&G Flooring

Specification Sheet #6042 - Trailblazer Mixed Hardwood T&G Flooring


When the first settlers moved into new regions of our expanding nation, they cleared small plots of ground for subsistence farming and used the felled trees for logs and timbers to construct homes for themselves and barns for their livestock. Because these resourceful settlers had to use what was available to them, they often did not discriminate among wood species--if the trees they felled were solid and durable they were used in the needed structures. It is in that same spirit of resourcefulness, economy and good stewardship that Trestlewood offers Trailblazer Mixed Hardwood T&G Flooring.


Mixed Hardwood. May include Oak, Elm, Hickory, Ash, Maple, Beech, others


Barns, corncribs, stables, mills, homes and other buildings and agricultural/industrial/construction structures and materials from different locations in North America

Flooring Type

Solid Wood, Unfinished


Tongue and Groove (T&G)


Unlimited; some knots are broken, loose or fallen out


Random nail holes; occasional bolt holes or peg holes; regular worm holes. Nail and bolt holes commonly have some stain surrounding the hole.


Moderate surface checking; some cracking is allowed as long as the board is sound.

Grain Pattern


Standard Dimensions

a) Thickness: 3/4"; b) Width: 3" to 7"; c) Length: 2 to 10' with no more than 5% of footage to be 2.5' or less.

Textures Available

As-Is, Skip-Planed, Smooth and Circle-Sawn

Skip-Planed Texture

Skip-Planed Texture is achieved by using the texture of weathered timbers or lumber and lightly planing that as-is face. The look of the skip-planed material will vary substantially from piece to piece. Some of the characteristics that will vary substantially from piece to piece are: original weathering (brown/gray, deeply checked/relatively smooth); original texture (circlesawn/bandsawn/weathered smooth); species; and color (light tan/pinkish/brown/gray/etc.) Some pieces (roughly 70% of the square footage) will "clean up" entirely and have no skipping.

Because the finish face of Skip-Planed flooring is not entirely milled, there will often be a slight "lip" along the seams where two floor boards come together upon installation. Attention to slight differences from piece to piece may minimize the impact of these differences, but will not eliminate it as an issue entirely.

Appearance Variation

Boards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted.