Douglas Fir Classic Smooth T&G Flooring

Specification Sheet #2002 - Douglas Fir Classic T&G Flooring


Douglas Fir


Various reclaimed wood projects

Flooring Type

Solid Wood, Unfinished


Tongue and Groove (T&G)


1 tight knot (1" or under) every 1 square foot allowed (on a 1x6 board, this would translate into 1 tight knot every 2 linear feet); larger knots in lower frequency allowed (for example, a 2" knot in 2 square feet that is otherwise clear would be allowed); 2" maximum knot size; knots can be broken, loose or fallen out


Occasional random nail holes and bolt holes; some staining around the nail holes and bolt holes or on the face is allowable


Moderate amounts of surface checking allowed; no cracks

Grain Pattern

Moderately tight grain; vertical, flat or mixed

Standard Dimensions

a) Thickness: 3/4"; b) Width: Varies, depending on Douglas Fir Classic Millwork Stock available at time of order; typical Classic flooring widths can be expected to be 3" to 7"; wider (and/or narrower) Classic flooring may be available at any given time; and c) Length: 1 to 10'.

Textures Available

Smooth, Wire-Brush and Circle-Sawn

Appearance Variation

Boards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted.