1 x 8 Mushroomwood Lumber

1 x 8 Mushroomwood Lumber

Specification Sheet #7210 - Weathered Mushroomwood

Request Quote

Height

Width

Length

Quantity

1"

8"

Rand 4-10'

min: 375 lf

Related Productline Pages

Mushroomwood

Specification Sheet #7210 - Weathered Mushroomwood

Species

Mixed Species. May include Cypress, Cedar, Hemlock, others.

Source

Mushroom growing facilities from different locations in North America

Metal/Holes

Nails and fasteners are removed or occasionally cut flush or broken off. Weathered Mushroomwood will generally have some nail holes, but few, if any bolt holes. Staining around holes is common.

Knots

Unlimited knots; some tight, some fallen out

Checking/Cracks

Unlimited as long as board is sound; many boards have dark checking and weathering.

Grain Pattern

Mixed

Moisture Content/Stability

Air-Dried (usually dry to very dry). Weathered Mushroomwood is generally much more stable and less prone to shrinkage than is green lumber.

Standard Dimensions

a) Thickness: 1" (actual: 5/8" to 4/4"); b) Widths: 4", 6" and 8" (other widths may occasionally be available);
c) Lengths: 1' increments from 4' to 16'.

Weight

Depending on species mix. Typically, approximately 2.5 pounds per board foot

Surfacing

Weathered (degree of weathering varies); face is generally extremely weathered with raised grain, feathered grain and/or very deep weathering in the soft grain of the material. Weathered Mushroomwood colors vary; a range of browns is much more common than grays. Mushroomwood colors generally range from some light browns to primarily darker browns and some gray or black streaks. One of the unique features of Weathered Mushroomwood is the variety of colors found therein. Many boards will have two or more shades of colors. As a result, Trestlewood generally does not offer a color sort which does not allow for some latitude in color provided.

Mushroom Spores

Weathered Mushroomwood was originally used in the process to grow mushrooms. It is very likely that the wood came in contact with mushrooms and their spores. It is possible that spores still exist on the wood and that the spores would grow if installed in a moist environment. It is important that mushroomwood not be installed into a moist environment, including the interior of a house that is not properly ventilated.

Appearance Variation

Boards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted. Weathered lumber / barnwood will have at least one weathered face. The opposite face and edges can be any combination of weathered and fresh-sawn. If weathered, the weathering will often be different (amount, mix of colors, etc) than on the featured face.

Trestlewood sometimes uses one or more juicing processes to help fresh-sawn and/or less weathered/aged faces/edges blend in with weathered faces/edges. All else being equal, juicing is more likely to be used in situations where (a) lumber is cut from timbers or wider lumber (thereby creating fresh-cut faces and/or edges); (b) Buyer wants all (or most) faces/edges to be weathered/aged; (c) Buyer desires to increase the consistency of the weathered/aged look from face to face; and/or (d) Buyer wants a darker weathered look.

Other

Weathered Mushroomwood can be very brittle and may split easily. Special care, such as pre-drilling holes for nails, is advisable.