Oak Circle-Sawn Timbers

    Oak Circle-Sawn Timbers

    unless noted otherwise, faces can be mix of weathered and fresh-sawn

    Specification Sheet #6100 - Resawn Oak Timbers

    Request Quote

    Height

    Width

    Length

    Quantity

    4-8"

    6-8"

    to 16'

    min: 1 each

    Related Productline Pages

    Oak Resawn

    Specification Sheet #6100 - Resawn Oak Timbers

    Species

    Oak (May be mixed Red and White or all Red or all White Oak).

    Source

    Barns, buildings and industrial structures from different locations in North America

    HC/FOHC

    Resawn Oak timbers are generally HC; usually moderate to very tight growth rings.

    Metal

    Nails, bolts and other fasteners are removed to enable the material to be resawn. Trestlewood makes no guarantee that there is no metal left in or broken off inside the beam.

    Holes

    Nail, bolt and other fastener holes are allowed; the quantity and size of the holes can vary widely from timber to timber, with some timbers containing no holes or only limited small nail holes and others containing frequent nail and bolt holes. Staining around nail and bolt holes is common.

    Mortise Pockets/Notches/Holes

    Resawn Oak timbers may have notches and mortise pockets from their previous use.

    Checking/Cracks

    Resawn Oak timbers generally have checking from the heart center to the exterior faces of the timber. Some of this checking may be extensive. Checking is out of specification only if it renders the timber unsound (meaning that it may fall apart because of the check.) In addition, timbers can have surface checking and cracks, moderate butt checking and end splitting.

    Moisture Content/Stability

    Resawn Oak Timbers are generally very dry and seasoned and are generally more stable and less prone to shrinkage than are green timbers.

    Surfacing

    Bandsawn. Color will vary based on the subspecies and level of staining.

    Weight

    Typically, approximately 4 pounds per board foot

    Appearance Variation

    Resawn Oak timbers often come from a variety of sources. As a result, timber characteristics can be expected to vary from piece to piece. Trestlewood believes that appearance variations (no two timbers exactly alike) are one of the selling points of this product line.