WeatheredBlend Barnwood - Mixed Grays/Browns  

Pick a Specific In-Stock Unit (great value; generally ships within 10 days)

Currently Available for Online Purchase/RFQ:  

Shop Standard Product Configurations 

(great value and good lead times!)


Rand 4-8"

Rand 4-16'

min: 250 bf


$5.74 per bf




Rand 4-16'

min: 250 bf

Request Custom Quote 

(additional costs and lead times generally apply)

1 to 3"

4 to 12"

to 16'

min: 1 each

Don't see what you need? Fill out more generic Request For Quote Form

WeatheredBlend Barnwood - Mixed Grays/Browns - Product Info

WeatheredBlend Gray/Brown Mixed Barnwood is a mix/blend product that combines the strengths of several reclaimed and non-reclaimed weathered/aged lumber sources to provide an optimized weathered lumber package.

WeatheredBlend Gray/Brown Mixed Barnwood packages may include, but are not limited to, a mix of Grays (Antique Barnwood - Grays, NatureAged Barnwood - Grays), Browns (Antique Barnwood - Browns, Harbor Fir Lumber, ThermalBrown Lumber, and NatureAged Barnwood - Backside Browns) and, depending on the particular application, other reclaimed and naturally weathered sources such as Trestlewood II "Salty Fir" Weathered Lumber, Spiegel SYP Weathered Lumber, Picklewood Weathered Lumber, and Spiegel SYP Weathered Lumber - Backside.

Below is a comparison of the two main product types that are "blended" to make up this product line (and which may be requested/purchased separately):

NatureAged Barnwood - Grays

Harbor Fir Lumber

ThermalBrown Lumber

NatureAged Barnwood - Backside Browns

  • Primarily non-reclaimed but also could include some reclaimed sources; weathered naturally after acquisition
  • More consistent character/color tones
  • Wider widths and longer lengths
  • Value Priced

Antique Barnwood - Grays

Antique Barnwood - Browns

Picklewood Weathered Lumber

  • Broad range of reclaimed sources; generally weathered during original use
  • Wider range of character/color tones
  • Narrower widths and shorter lengths
  • Premium priced

Specification Sheet #7240 - WeatheredBlend Barnwood Lumber
Products InvolvedTrestlewood's WeatheredBlend Barnwood Lumber is a mix/blend of Antique Barnwood Lumber (Specification Sheet #7200), NatureAged Lumber (Specification Sheet #7220), Harbor Fir Lumber (Specification Sheet #2240), ThermalBrown Lumber (Specification Sheet #7230), Trestlewood II "Salty Fir" Weathered Lumber (Specification Sheet #1202), Weathered Picklewood Lumber (Specification Sheet #s 2215, 4215, 4216) and/or various other reclaimed and non-reclaimed sources of weathered/aged lumber. Blended products are results oriented - they increase Trestlewood's ability to help economically achieve a look desired by a client by freeing up the strengths and inventory of multiple complementary product lines.
SpeciesMixed Species. May include Pines, Firs, Spruce, Larch, Oak, Elm, Hickory, Hemlock, Ash, Maple, Beech, Poplar, Cedar, Redwood, Cypress, and/or other species. Generally heavy to (or even exclusively) softwoods unless hardwoods are specifically ordered. Trestlewood can include hardwoods at its discretion. Trestlewood generally does not sort its weathered lumber products by species (its focus is on look, not species) and is, therefore, generally not in a position to provide weathered lumber in a specific species. Mixed Species means that any combination of species (including all one species) is allowed.
SourceAntique Barnwood: Barns, corncribs, stables, mills, fences, homes, and other buildings and agricultural/industrial/construction structures and materials from different locations in North America; can include lumber which is resawn from reclaimed timbers/poles/lumber and then laid out to weather.

NatureAged Lumber: Naturally weathered to achieve a rustic grayish/brown appearance. Lumber that is laid out to weather comes from a variety of sources, including: i) new lumber, ii) lumber cut from beetle-killed, fire-killed or dead-standing trees, iii) lumber cut from material which has weathered out of spec, and/or iv) lumber cut from lumber/timber reclaimed from various salvage projects/prior uses (this lumber also qualifies as Antique Barnwood Lumber.)

Harbor Fir: Typically sprayed with water from the Great Salt Lake, often when in contact with metal to introduce dark streaking and other character. The raw lumber used to create Harbor Fir can come from a variety of sources, including: i) new lumber; ii) lumber cut from beetle-killed, fire-killed or dead-standing trees; iii) lumber cut from material which has weathered out of spec; and iv) lumber reclaimed from various salvage projects.

ThermalBrown Lumber: Created by running lumber through a thermal modification process. The raw lumber can come from various sources including the types of sources listed under NatureAged and Harbor Fir Lumber.

Trestlewood II "Salty Fir" Weathered Lumber: cut from Douglas Fir piling/poles of Lucin Cutoff Railroad Trestle (Great Salt Lake) and laid out to weather. High salt/mineral content (see Trestlewood II specification sheet.)
Metal/HolesNails, fasteners, and other metal can be removed or left in at Trestlewood's discretion (Trestlewood is especially likely to leave metal whose removal could be expected to result in the gouging of barnwood faces/edges); where left in, metal will often be cut flush, broken off or pushed in to facilitate efficient stacking/handling. Metal removal / metal detection is sometimes available at an additional charge. Barnwood Lumber will generally have some nail holes and can have an occasional bolt hole. Staining around holes/metal is common. Antique Barnwood is more likely to have metal that needs to be cut flush or broken off than NatureAged, Harbor Fir, ThermalBrown, or TWII "Salty Fir" Weathered Lumber.
KnotsUnlimited knots; some tight, some loose or fallen out
Checking/CracksUnlimited as long as board is sound
Grain PatternMixed
Moisture Content/StabilityAir-Dried. Moisture content and stability of a specific board depend on a variety of factors, including source, season of year, weather, location stored, etc. Barnwood lumber is typically stored outside and can get quite wet during the winter and other periods of wet weather. Kiln drying is generally available at an additional charge. NatureAged Lumber is generally more stable and less prone to shrinkage and other movement than is green (new) lumber. Antique Barnwood is generally more stable and less prone to shrinkage and other movement than is NatureAged Lumber and other non-reclaimed sources of WeatheredBlend Lumber (with the possible exception of ThermalBrown Lumber.) Wood is wood and will move.
Standard Dimensionsa) Thickness: 1" (actual: 5/8" to 4/4") and 2" (actual: 1 1/2" to 8/4"); b) Width: random, 4" to 10"; 12" widths are also often available (actual widths can be as much as 3/4" nominal); c) Lengths: 4' to 16'. NatureAged, Harbor Fir, and ThermalBrown Lumber tends to be wider and longer on average than Antique Barnwood.

Where more consistent thicknesses and/or widths are desired, thickness planing/resawing and/or edging processing options are often available. Boards can have small sections that fall outside standard thickness and/or width ranges. Trestlewood will often leave board ends that dip below 5/8" thick (or otherwise fall outside standard dimension ranges) to give the Buyer as much flexibility as possible, but exclude those ends when tallying board footage so as to not charge the Buyer for ends that will likely need to be trimmed in the field.
WeightDepends on species mix and other factors. Typically, 2.5-3.0 pounds per board foot.
Surfacing/Texture/ColorsWeatheredBlend Barnwood Lumber includes a wide range of surfacing/textures. Antique Barnwood can be rough-sawn or smooth. NatureAged, Harbor Fir, ThermalBrown, and Trestlewood II "Salty Fir" Lumber is generally originally rough-sawn (circle-sawn and/or band-sawn), but may have weathered somewhat smooth. Degree of weathering varies from source to source. Antique Barnwood is often more deeply weathered than NatureAged Barnwood.

WeatheredBlend Barnwood colors can also vary widely. Common colors include browns, light browns, grays, light grays, and combinations of browns and grays. Many boards have a mix of colors. Some boards may have striping as a result of variations in weathering from being attached to other material during use. Trestlewood can often sort for a heavy-to-browns or heavy-to-grays color range, but generally does not offer a color sort which does not allow for some latitude in colors provided. NatureAged Barnwood is generally more consistent in color and other characteristics than is Antique Barnwood.

WeatheredBlend Barnwood Lumber can have 1 fresh-sawn (or less heavily weathered) face and 1 or 2 fresh-sawn edges (i.e., the focus is on producing a product with 1 weathered "primary" face). Where an application requires that both faces be weathered and/or that one or both edges be weathered, Trestlewood needs to be made aware of this so that it can quote and sort accordingly.
Appearance VariationBoards can vary in appearance from piece to piece and even within a piece. The characteristics described on this specification sheet generally apply to each board's featured face. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted. Weathered lumber / barnwood will have at least one weathered face. The opposite face and edges can be any combination of weathered and fresh-sawn. If weathered, the weathering will often be different (amount, mix of colors, etc) than on the featured face.
Siding Product ConfigurationsWhen Trestlewood quotes 1,000 square feet of a specific siding configuration, it is quoting enough material to provide 1,000 square feet of coverage based on default installation assumptions and 0% installation falldown. Buyer should order enough product to cover anticipated installation falldown and the impact of any changes to installation assumptions. Siding configuration options include:

(a) Board to Board (common widths: 4", 6", 8", 10", mixed)
(b) Board and Batten (common board widths: 8", 10", 12"; typical batten width: 4"; assumed: installed with 2" gaps between boards)
(c) Board on Board (common widths: 6", 8", 10", mixed; assumed: installed with 1" overlap on each edge)
(d) Shiplap (common face widths: 5", 7", 9" (often actual face widths of 4 3/8" to 4 7/8", 6 3/8" to 6 7/8", 8 3/8" to 8 3/4"); target thickness often 11/16" or 3/4"+/- for NatureAged and 11/16"+/- for Antique and WeatheredBlend; most commonly, 3/8" shiplap joints are milled on opposite edges and opposite sides of boards)
(e) Wedgelap w/ Rabbet (common face widths: 5" (typical actual coverage of 4 1/2" to 4 3/4"), 7" (6 1/2" to 6 3/4"), 9" (8 1/2" to 8 3/4"); typical thickness of +/- 1/4" on thin side to +/- 3/4" on thick side; rabbet added)
(f) T&G (common face widths: 3", 5", 7", mixed; target thickness often 3/4"+/- NatureAged and 11/16"+/- Antique and WeatheredBlend; fit of barnwood siding T&G often not quite as good as flooring T&G)

Unmilled siding products (a, b, and c) are standard barnwood lumber. Targeted thicknesses and widths of milled siding products (d, e, and f) are generally driven by barnwood lumber inventory on hand. The milling process generally reduces but does not eliminate variation in actual thicknesses and widths (across boards and even within specific boards.) The milling process often creates additional character like loose or fallen out knots. Such defects are generally left in the boards; buyer can decide whether to install them as is, cut them out, or fill them. Kiln drying lumber prior to milling it can increase the tendency for knots to become loose during the milling process. The average length of siding boards (especially milled siding boards) will generally be less (sometimes significantly less) than the average length of lumber boards. Siding square foot prices will generally be somewhat to significantly higher than lumber board foot prices because they reflect more material and, in the case of milled products, additional processing costs.

Trestlewood makes no representations about the fitness of its products for use as siding or in any other application. It is ultimately the Buyer's responsibility to (a) determine which products (and their accompanying characteristics) are acceptable for use on its project and then to (b) make sure these products are handled and installed correctly. While Trestlewood is not a construction or installation expert, it does periodically pass on (without any guarantee of accuracy) information/resources to its customers that it thinks might provide helpful starting points to consider - see, for example, Trestlewood's 6/2/2016 blog post "Thoughts to Consider Prior to Wood Siding Installation" and other blog posts/resources on
Processing OptionsAdditional processing options often available include kiln drying, fumigation, thickness planing/resawing (to reduce thickness variation), edging (to reduce width variation), pressure washing, and metal removal / metal detecting (does not result in guarantee that all metal is removed.) Many of these processing steps are likely to increase the number of loose and open knots.
Target MixTrestlewood generally targets 50% Antique Barnwood and other reclaimed sources and 50% NatureAged, Harbor Fir, ThermalBrown, and other non-reclaimed sources in filling WeatheredBlend Barnwood packages involving random widths and lengths and otherwise standard characteristics. Specific width, length and other requirements will often change the targeted mix. For example, packages heavy to wide and/or long lumber or that put a premium on color consistency will generally result in an increase in the percentage of NatureAged, Harbor Fir, ThermalBrown, and/or other non-reclaimed lumber targeted. Target percentages apply to overall package quantities, not to each individual proposal line item.
OtherBarnwood is a rustic product with rustic character. Such character can include checking, metal/holes, loose or missing knots, dimensional variation, wane, punkiness/surface rot, gouging, twisting, cupping, color and texture variation, and other imperfections. Barnwood can be very brittle and may split easily. Special care, such as pre-drilling holes for nails, is advisable.
Note: Please study specification sheets to familiarize yourself with product characteristics and their possible implications for your application.